Product 

Delta WASP 20 40 Turbo2 ZEN dual extruder 

#

The ideal printer for your dual print project

ZEN Extruder is the solution for a faster and accurate double extrusion 3D print. Featuring the configurable Spitfire System and a totally mechanical basculating switch it just condenses all the best of WASP technology.

Technical Features
  - Delta WASP extruder, with filament driver for 1.75 mm filament.
  - 2 ZEN Cartridges LT with 0.4 mm steel nozzle as standard to print at low temperatures.
 Important: only the Delta WASP 2040 Turbo2 and Delta WASP 4070 Industrialprinters are available with the ZEN Dual Extruder – (to be requested at the time of order).

Product description
The WASP double extruder, designed to meet the needs of those customers who want to print using:

  - two different materials, to insert supports;
  - use two different types of materials that require different temperatures;
  - two different nozzle diameters, or two different colors filaments.


ZEN Extruder is the solution for faster, more accurate 3D printing with double extrusion.

The ZEN Extruder adopts the configurable architecture of the new Spitfire System and, thanks to a mechanical switching system of the extruder that is printing, it incorporates all the best of WASP technology.

STOP & CLEAN ANTI-OOZING FLAPS

The innovative anti-drip flap, when the second extruder is activated, immediately cleans the nozzle that is deactivated without requiring the whole extrusion system to move to the perimeter of the print surface at each extruder change, to allow the dripping of molten material inside the just used nozzle. This innovative solution allows significant time savings during the whole printing process.

MOTOR FREE SWITCHING SYSTEM

The exchange system between an extruder and the other is mechanically performed without the need for additional servomechanisms through a variable height tilting solution for a faster and more reliable printing.

INTERCHANGEABLE CARTRIDGES

Two types of cartridges have been designed to meet all your needs:
  - LT ZEN Cartridge with teflon to print at low temperature (indicated for PLA; PETG and FLEX) 
  - HT ZEN Cartridge without teflon to print at high temperature (suggested for ABS; PA; PC; HIPS; PA+C; ASA; PMMA and PP)

The standard ZEN is with LT cartridge with 0.4 mm steel nozzle.
The ZEN cartridges LT and HT are available with nozzle of 0.7 / 1.2 mm of diameter too (note: they are different from the ones of the Spitfire System because they have a different coupler diameter).
 
Three nozzle sizes on the same extruder each for a specific need

Technical Features:
  - Delta WASP extruder, with filament driver for 1.75 mm filament.
  - 2 ZEN Cartridges LT with 0.4 mm steel nozzle as standard to print at low temperatures.

 



Hits 243